CP-E

cp-e ΔCore Ford Fiesta ST FMIC Front Mount Intercooler

€790,83 exc TAX

After months of development, cp-e™ released the ΔCore Ford Fiesta ST FMIC. The stock intercooler works for the everyday unmodified ST. However, once you want to go faster, the intercooler is a must have modification. The CP-E Intercooler will allow power levels to flow with zero heat impact. Cooler = More power!

As a guide, EU delivery cost varies on service requested and weight / dimensions. Final rate depends on which EU Zone you are in for DPD services. Below are some guide examples. 

Some countries may be serviced with other providers if required.

FREE SHIPPING is available on orders over a certain amount (country dependant)

We aim to ship same day if ordered before midday.

1. Standard EU Shipping: DPD Courier with tracking - 2-3 days (for main EU countries)

DPD Zone 1: €14.99 + vat 0-5KG      - €19.99 5-30 KG

2. Small Items (via Royal Mail) -from 2 days - 2 weeks depending on location.

Covers all European countries:  €14.99 + vat 0-2KG:

You will receive a shipping notification with tracking details once order is processed.

NOTE we CAN ship worldwide. please contact us if assistance required as a custom shipping solution may be required.

We reserve the right to change charges and services as required.

After months of engineering and development, cp-e™ released the ΔCore (DeltaCore) Ford Fiesta ST FMIC. The stock intercooler does an excellent job for the everyday driver that doesn’t want to modify their car. However, once you find that itch to go faster, the intercooler is a must have modification.

Fiesta ST FMIC Features

  • Low Turbulence End Tank Design
  • Minimal Pressure Drop
  • Maximized Core Design
  • Substantially Lower & More Consistent Charge Temps
  • Bolt-in Design, No Vehicle Modification Needed
  • Fully Cast End-Tanks


cp-e™ started off by determining the maximum size core that could fit without major modification to the vehicle. Our Ford Fiesta FMIC uses the bar and plate design to help ensure a high level of efficiency.

cp-e™ then set their sights on designing the perfect Fiesta ST FMIC end-tanks, developing a design that not only encloses the monstrous core, but also requires no cutting, no drilling, and no permanent modification to the vehicle. With the laser cut brackets, the intercooler will mount in the stock location while matching up to the stock intercooler piping. Customers can now upgrade their piping when their power demands need it and modify in smaller increments.

As always, the cp-e™ intercooler includes cast end-tanks that are welded and pressure tested with the core. What sets these endtanks from the rest is the engineering behind their shape and internal design. Hours of design and computer flow diagrams have been put into the tanks’ design to virtually eliminate turbulence within them. Many times, upgrading an intercooler causes increased turbo-lag, and an overall pressure loss. This is because of the large size of the core and the turbulence within the end tanks. By designing the end-tanks to be smaller, and more efficient cp-e™ has found a way to minimize turbulence in order to keep the drivability of the car high, while still enlarging the intercooler drastically.

The internal design of the end tanks directs the air to bring the most optimal airflow as well as an even distribution throughout the core. In intercoolers, the back half of the core only does 25% of the cooling. The end tanks have been designed to direct the air properly into the core for the most even cooling, giving the vehicle the most consistent conditions going into the engine.

Fiesta ST FMIC Highlights

Turbulence Reduction Fins
When creating an intercooler, the goal is to maximize size, while not increasing pressure drop. Larger cores almost always exhibit some form of pressure drop, due to the massive turbulence in a large core. cp-e™ has engineered a way around this by adding our carefully calculated turbulence reduction fins to smooth out the airflow from the end tanks to the main core.

In the real world this translates to extraordinarily low pressure drop and no loss in spool times.

CP-E Fiesta ST Anti Turbulence end tanks



Fully Cast End Tanks
When durability and high horsepower are the main goals, nothing beats casting. Cut and weld sections just don’t have close to the reliability of a cast piece. The problem is that casting is too expensive and out of reach for many manufacturers.

With the ultimate product as our end goal, we only accept fully cast end tanks for all of our front mount intercoolers.

CP-E Fiesta ST Intercooler fully cast end tanks

 

Part: FDCK00002T

Recently viewed