Yes! We at Steeda Europe believe in recycling where possible so thanks for helping us do what we can. We do attempt to recycle appropriate packaging where possible.

Yes if you change your mind in the statutory time limit after purchase and it is unopened and unused we are happy to accept returns.

You can read details of our Refund Policy

You can read our TERMS & CONDITIONS for more info

Yes. We endeavor to keep all EU "World Car" Steeda components in stock as well as those of our partners, such as Sparco Wheels.

Non EU market Items (such as Steeda pre S550 Mustang parts or special items such as race parts) will be special orders, and so there will be a small delay before they are received.

Our only "normal" non stock items are Velgen Wheels and some exhausts as the range of sizes and colours mean they are brought in specifically to order. However air freight can be done very rapidly if needed.

Most of our Susupension & chassis parts for the S550 Mustang ARE certified and homolgated for ALL European markets, under our e5_KS18_858_00004_00 EU certification. Each product that is certified will say this on the product page.
PLEASE NOTE that as a pan European vehicle manufacturer certification we do NOT have individual certificates for components, as this is not how whole vehicle certifiation works in EU law.

Yes! Steeda adjustable suspension, as well as items like braces and jacking rails are strapped to the underside of your car and can be subject to very harsh conditions with water, grit, dirt, rocks, salt and more hitting and coating them.

Even powder coating cannot resist a constant beating and so you should periodically check your underside components as part of your service and maintenance schedule and clean and protect as needed, and lubricate parts that offer adjustment (or you will find they dont offer adjustment any more after a while!). The worse conditions you drive in the more frequently you should check your parts

Yes we do! Steeda were the first company to have their own tunes for sale in a Ford dealership, and stand behind them as the best in the business. Steeda tunes aren't extreme but give GREAT results and perfect every day drive-ability, with the peace of mind of Steeda's unparalleled Ford experience.

Yes we can. Start by watching our programming guide video:

CLICK HERE TO WATCH

When you receive your X4 & CAI Power Pack:

1. Check out the how to vids on our page: https://www.steeda.co.uk/PBCPPlayer.asp?PW=1&ID=1851109

2. Plug in your SCT X4 to your computer and install the software and UPDATE everything before continuing.

3. Data read your car

4.Fill in the tuning for at www.steeda.com/tuning put Steeda UK as agent / rep in first box.

5.(POWER PACK INFO ONLY) WAIT for your tune. Your Steeda INTAKE is designed for use with the Power Pack Tune ONLY. Its de-restricted for Maximum power gains so CANNOT be installed without the tune.

6.Steeda Tunes must be used with HIGH Octane 97 / 99 Petrol.

If that doesn't help, then please contact us!

Simple! All you need to do is buy 3 Steeda products from us.

The terms and conditions can be found HERE

We support Steeda tuning files only, that is something you will have to discuss with your own tuner.
 

This is achieved by plugging your SCT handheld device and interrogating the vehicle info:

WATCH THIS VIDEO TO SEE HOW ITS DONE

Basically its as easy as 1-2-3

1. Plug in SCT handset
2. Select "Vehicle info"
3. Turn on ignition but NOT engine

Then read the codes and note down your ECU strategy Code, and ECU serial number

YES!

2015+ FORD MUSTANG
Street Front Alignment:

OE Camber = -0.8 deg (+/-0.8 deg)

OE Caster = 7.2 deg (+/-0.8 deg)

OE Toe = 0.00 deg (+/-0.2 deg)

Steeda target Camber = -1.2 deg

Steeda target Caster = 7.5 deg

Steeda target Toe = 0.2 deg

Street Rear Alignment:

OE Camber = -1.2 (+/-0.8 deg)

OE Toe = 0.1 deg. (+/-0.2 deg)

Steeda target Camber = -1.6 deg

Steeda target Toe = 0.2 deg

In general for track use, you will increase the Camber on the front and rear (negative)

So instead of 1.2 deg, you may run 1.7 deg (negative)
To find the ‘best’ negative camber, you will need to try different settings and take tire temperatures to evaluate your results.
 

NO! Steeda are Ford to the core!

However some of our partner products will work on other cars. Our wheel selection from Velgen and OZ Racing for example or products like Rad Relief.

Its a simple check. The Steeda Billet Battery strap will fit many older Fords, including the mk5 and mk6 Fiestas as well as the Puma and B Max.
But it will only replace the SIMPLE battery strap. If you have an extra part attached to your battery strap for air con for example, it will not fit...

See our picture on facebook which shows this part:

As a recommended initial "standard" setup we advise using the middle of the 3 holes on the rear and the second hole from the end of the bar on the front bar (4 holes). Then adjust to suit driving style, car setup and conditions!

We only show the most popular parts on our website but we regard ourselves as a ONE STOP SHOP for performance Fords. Just ask us via our contact us page and we should be able to get it for you! Whether it's a Steeda part or something from the many companies we work with, we can help.

Yes we can! Check out our Beginners Exhaust Guide on our "Speed Matters!" Blog

Insurance is a legal requirement but the cover provided for a modified car is different in comparison to regular car insurance. A great amount of time and money is invested into modified cars including expensive equipment and parts. These add-ons need to be protected and a modified car insurance policy will do just that. It makes sense to insure your investment and protect your gear with our trusted insurers.

To put it simply, if your car has been altered or customised in any way since leaving the car factory then it is classed as modification. Cover for a modified car starts from small changes such as added alloy wheels, or even replacing your stock alloy wheels to performance enhancing gear. Anything that modifies the look or performance of your car needs to be declared in order for you get the best insurance.

Steeda EU only provide parts, however one of our authorised fitters can service your needs.
We recommend a number of authorised Steeda fitters
You can find out more on the Contact page or on our Dealers page

The answer is yes and no! We have many customers who are happy to get stuck into modification and fitting themselves and this CAN be a fun and rewarding way to get to know your car better.

HOWEVER: Steeda recommend all installations are done by professionals. Working on cars CAN be hazardous (both to you AND your car!) and we cannot be held liable for either injury to your self or to your car caused by faulty installations. Our instructions are thorough but may contain errors and are meant to help professionals if they have a question rather than be seen as a complete "DIY" walk through which anyone can manage.

Even "simple" installs can prove to be not so simple if your car isn't playing ball!

99% of "problems" reported to us turn out to be install issues.