Vortech Mustang S550 GT Supercharger Complete or Tuner Kit (15-17)

Complete Vortech System
2015-2017 - Complete systems are available for manual and automatic transmission vehicles.

The complete system will boost your stock 2015-2017 GT to 630 HP and 483 lb/ft torque with 7.5-8.5 PSI from the V-3 supercharger at the factory redline.

The S550 Mustang system uses Vortech's V-3 Si supercharger. Continued development in Vortech's Lab resulted in the V-3 Si. The "i" stands for improved and with its new patented oil control system and state of the art centrifugal compressor stage this V-3 literally blows away the competition. Industry leading 78% adiabatic efficiency [SAE J1723 standard] means less heat is being generated, drive power is reduced and more net power is produced. Less heat also means better durability. Also, Vortech's supercharger systems weigh less than half of the low-tech competing brands

Superior Technology
Centrifugal superchargers easily make more pressure and flow than a roots type blower and are much more efficient. Read our Roots vs Centrifugal comparison to see the numbers.

Vortech supercharger systems are great value. Per pound /Euro spent Vortech systems deliver more horsepower than virtually any other method of upgrade. Also, driven normally, economy often increases rather than decreases.

Additional Kit Options
For higher-horsepower, custom-tuned installations we recommend a tuner kit, which does not include a fuel pump, fuel injectors or ECU programmer. This requires you or your installer to provide custom calibration and the required fuel components. The V-3 Si supercharger included with the tuner kit is capable of up to 775HP on modified vehicles. Tuner kits are also available with the 1,000HP V-7 JT supercharger for high-performance racing vehicles. CONTACT US

Available Supercharger Finishes
Multiple kit finishes available. For that fully integrated look, 5.0 Mustang systems are available in factory matching black finish. Satin and Polished units are also available.

Complete System Included Components and Features
- V-3 Si compressor with 3.60" drive pulley
- Manifold boost pressure: 7.5-8.5 psig @ redline on stock engine
- Supplied SCT programmer re-flashes the ECM with a safe, custom Vortech calibration for 91-octane fuel. NOT FOR EUROPEAN CARS 
- Fuel system upgrade includes fuel rail spacers and high flow replacement fuel injectors

Air inlet assembly includes:
- High-flow roto-molded ducting. Mates to OEM airbox and some aftermarket "CAI" MAF/inlet assemblies
- OEM replacement K&N panel filter
- Silicone sleeves and reducers
- Stainless steel clamps
- PCV and breather hose provisions
- Replacement engine coolant pipe and hose assemblies
- Engine coolant reservoir replacement assembly
- Dual plate supercharger mounting system includes idlers, drive belt and all hardware. Mount features multiple position idler location for a wide range of belt and pulley fits.

Discharge components include:
- High flow air/air charge cooler. 24" x 13" x 3.5" cooler core.
- Mandrel bent 3" and 3.5" aluminum charge tubes for high flow and minimal weight
- Stainless steel clamps
- Silicone sleeves
- 98mm MAF housing configured for "blow-through" use. Integrated air-straightener upstream of the MAF housing.
- Vortech Maxflow Race Bypass Valve with filter

Installation
Installation time is rated at 6-9 hours.

ALL SUPERCHARGER KITS are made to order. Contact us for details and to put together a kit and order

50-State Smog Legal under CARB E.O. # D-213-36 (Not EU applicable but a note of quality)

Steeda offer a limited lifetime (minimum 2 years) warranty for material and manufacturing defects.

The warranty is for the original purchaser only and is non-transferable.

WHAT IS NOT COVERED
The following items are not covered under the Limited Warranty:

1. Failure or damage resulting from normal wear and tear, improper installation, repair, abuse, misuse, neglect, negligence, accidents, corrosion, or the alteration or modification of a part by the customer.
2. Failure or damage caused by work not performed by Steeda.
3. Failure or damage caused by a defective part or accessory not installed by Steeda main dealer.
4. Labour for the removal from a vehicle and reinstallation of a part or component sold “over the counter” or “over the internet.”
5. Service adjustments, such as calibration or alignments.
6. Rust or corrosion to parts caused by environmental conditions such as, but not limited to, salt or other caustic chemicals is not covered by Steeda's warranty.
7. Pitting is caused by brake dust, chemical abuse, or lack of maintenance and is not covered by Steeda's warranty.
8. Incidental or consequential damages. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.

FULL TERMS AND CONDITIONS HERE

Importer: Steeda Europe (Performance Imports BV)

Contact:
Postal Address: Choorhoekseweg 8, 4424 NW, Wemeldinge, Netherlands
Email address: info@steeda.co.uk

Read more GPSR info here: Terms of service  (section 21)