Steeda S550 Mustang includes custom designed Pro-Action adjustable front struts which feature rebound adjustment. Threaded collars and spring perches offer easy ride height adjustment from stock to 2" lowering.
The Steeda S550 Mustang Front Coilovers also includes our Steeda custom designed adjustable bumpstops! Allowing you to adjust your suspension travel for the ultimate in performance for any application.
The front coilover system also utilizes our Steeda S550 Mustang Camber Plates that provide - 3 degrees of camber adjustment.
Steeda's S550 Mustang Adjustable Rear Ride Height Kit will give you the ability to lower the rear of your S550 Mustang from 3/4" to 1-1/2", this kit allows you to dial in the ride height to your liking. The rear Ride Height Adjusters are made from billet 6061 aluminium in house and Hardcoat anodized for the ultimate in strength and protection. These simply install above the rear springs and come with an included wrench to allow you to adjust your height with ease. The Steeda kit is also designed with a locking set screw to hold your adjustment in place. Add in Steeda's Pro-Action Shocks for even more rear control and reduced wheel hop and body oscillation and you have a winning combination!
Product Benefits
NB These are special order items due to our large range of customisable spring rates etc. However lead times should be short!
Steeda spring tips:
For typical street performance, go with around 250/275
300/350 for autocross or track use.
Either will work with our rear spring, which is 1000/1100 dual rate spring.
If drag racing, go with a 150
Engine weight & local roads plus comfort level desired should all factor into your choice
INSTALL GUIDE - RIGHT CLICK & SAVE AS
Steeda offer a limited lifetime warranty for material and manufacturing defects.
The warranty is for the original purchaser.
WHAT IS NOT COVERED
The following items are not covered under the Limited Warranty:
1. Failure or damage resulting from normal wear and tear, improper installation, repair, abuse, misuse, neglect, negligence, accidents, corrosion, or the alteration or modification of a part by the customer.
2. Failure or damage caused by work not performed by Steeda.
3. Failure or damage caused by a defective part or accessory not installed by Steeda main dealer.
4. Labour for the removal from a vehicle and reinstallation of a part or component sold “over the counter” or “over the internet.”
5. Service adjustments, such as calibration or alignments.
6. Rust or corrosion to parts caused by environmental conditions such as, but not limited to, salt or other caustic chemicals is not covered by Steeda's warranty.
7. Pitting is caused by brake dust, chemical abuse, or lack of maintenance and is not covered by Steeda's warranty.
8. Incidental or consequential damages. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Importer: Steeda Europe (Performance Imports BV)
Contact:
Postal Address: Choorhoekseweg 8, 4424 NW, Wemeldinge, Netherlands
Email address: info@steeda.co.uk
Read more GPSR info here: Terms of service (section 21)
Choose options