Steeda S197 Mustang Tubular Upper 3rd Link Control Arm 2011-14 Mustang
Need more axle control with those sticky tires? The new Steeda Tubular Upper 3rd-Link gives you the ability to eliminate the torque deflection associated with the factory piece. Steeda's upper link uses our track proven three-piece urethane bushing design on the chassis end to eliminate the annoying windup and wheel-hop you get with the soft factory bushing. Steeda's upper 3rd link is a direct replacement for the factory original bolting into the factory location. Aluminum reinforced plates are a very high, aircraft quality. Comes Blue Powdercoated with bump stop and hardware.
Stepped Spacer Details
This spacer is designed to fix the problem with the OEM upper link. At the attachment point for the upper link to the chassis mount Ford uses a 14mm bolt, but the opening in the mount is 16mm. This is not typically a problem with the OEM mount as it uses a soft hydra mount bushing to soften this. But once an aftermarket upper is installed with a urethane bushing can transmit this noise or clunk. This space can be installed with all aftermarket upper that still use a 14mm bolt. The stepped spacer takes up the slop and eliminates all noise from the upper. Note, it does work with aftermarket chassis mounts with smaller then 16mm bolt holes.
Notes
- All Steeda Upper Third Links produced on or after February 2007 include the Stepped Spacers.
- Steeda's non-adjustable upper third link part number 555-4096 is intended for use on lowered vehicles only. Steeda's 555-4097 upper 3rd link can be used on stock ride height and lowered applications.
- This upper third link is not compatible with Steeda's Upper Chassis Mount for 3rd Link (555-4027). Please see the product page for Steeda's compatible 3rd link's.
This spacer is designed to fix the problem with the OEM upper link. At the attachment point for the upper link to the chassis mount Ford uses a 14mm bolt, but the opening in the mount is 16mm. This is not typically a problem with the OEM mount as it uses a soft hydra mount bushing to soften this. But once an aftermarket upper is installed with a urethane bushing can transmit this noise or clunk. This space can be installed with all aftermarket upper that still use a 14mm bolt. The stepped spacer takes up the slop and eliminates all noise from the upper. Note, it does work with aftermarket chassis mounts with smaller then 16mm bolt holes.
Warranty Info
Steeda offer a limited lifetime warranty for material and manufacturing defects.
The warranty is for the original purchaser.
WHAT IS NOT COVERED
The following items are not covered under the Limited Warranty:
1. Failure or damage resulting from normal wear and tear, improper installation, repair, abuse, misuse, neglect, negligence, accidents, corrosion, or the alteration or modification of a part by the customer.
2. Failure or damage caused by work not performed by Steeda.
3. Failure or damage caused by a defective part or accessory not installed by Steeda main dealer.
4. Labour for the removal from a vehicle and reinstallation of a part or component sold “over the counter” or “over the internet.”
5. Service adjustments, such as calibration or alignments.
6. Rust or corrosion to parts caused by environmental conditions such as, but not limited to, salt or other caustic chemicals is not covered by Steeda's warranty.
7. Pitting is caused by brake dust, chemical abuse, or lack of maintenance and is not covered by Steeda's warranty.
8. Incidental or consequential damages. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Choose options