Steeda S197 Mustang Bumpsteer Kit (2005-2014)

If you have lowered your vehicle the chances are you have introduced bump steer. What is bump steer? Bump Steer is changes in toe caused by suspension movement. Every car has bump steer, however when you lower the vehicle you increase the amount of bump steer that occurs, if this becomes excessive you will begin to notice some unwanted vehicle driving characteristics. When you turn your steering wheel you are essentially changing the toe of the wheels to turn the vehicle. Excessive bump steer is undesirable because it introduces unwanted steering inputs which means the suspension is steering the car instead of the driver. If your car is lowered and has tracking issues and less predictable steering behaviour, you need a bump steer kit. Steeda's Bump Steer Kits will allow you to correct your bump steer geometry and can do so without requiring you to drill or modify your vehicle spindle. In addition, our bump steer kit makes a great service replacement for your worn out, high mileage outer tie rods even if you do not have excessive bump steer issues.

Steeda Tapered Stud Design Advantages
Studs are CNC machined to the exact taper of the factory spindle, for a simple install every time.
Made of 4140 high-grade steel for superior strength.
Machined to exact tolerances for an exact fit.
Heat treated to our specs after machining to ensure hardness throughout stud.

Bolt Design Disadvantages
Requires drilling the spindle hole to a 5/8" diameter. Bit costs $17 at local Hardware Store.
Basic grade 8 bolt that can vary in strength.
Must drill spindle to bolt size, will have "play" or "slop".
No steps taken to ensure material hardness.

Read more from MotorTrend about the installation process and specific benefits that can be gained from installing Steeda Ball Joints and Steeda S197 Bumpsteer kits on your S197.

Read about what Billy Johnson, a professional racecar driver, has to say about the Steeda Mustang Bumpsteer Kit in his article on MotoIQ.

Pick up a bump steer kit today and refresh your outer tie rods and improve your steering.

Note: Will not clear 16" wheels. Will  not  work with BOSS or BOSS Steering Rack

Steeda offer a limited lifetime warranty for material and manufacturing defects.

The warranty is for the original purchaser.

WHAT IS NOT COVERED
The following items are not covered under the Limited Warranty:

1. Failure or damage resulting from normal wear and tear, improper installation, repair, abuse, misuse, neglect, negligence, accidents, corrosion, or the alteration or modification of a part by the customer.
2. Failure or damage caused by work not performed by Steeda.
3. Failure or damage caused by a defective part or accessory not installed by Steeda main dealer.
4. Labour for the removal from a vehicle and reinstallation of a part or component sold “over the counter” or “over the internet.”
5. Service adjustments, such as calibration or alignments.
6. Rust or corrosion to parts caused by environmental conditions such as, but not limited to, salt or other caustic chemicals is not covered by Steeda's warranty.
7. Pitting is caused by brake dust, chemical abuse, or lack of maintenance and is not covered by Steeda's warranty.
8. Incidental or consequential damages. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.

FULL TERMS AND CONDITIONS HERE