Steeda Mustang X24 Ball Joint Kit (2024+)
Steeda's X24 ball joints are a longer, stronger ball joint designed to raise the front roll center of your Mustang which becomes lower as a result of lowering the vehicle with springs or an adjustable ride height system.
Raising the roll center eliminates the issues associated with the lower roll center which include reduced cornering grip, increased body roll, and increased understeer.
Our X24 ball joints will improve handling by reducing body roll and improving the front tire contact patch without increasing spring rate or roll bar rate. You will experience improved steering response and higher overall front cornering grip with reduced understeer as a result.
Steeda ball joints are made from high strength steel and case hardened to meet and exceed OEM strength and durability standards. All internal housing parts are made from low-friction Nylon to preserve factory steering feel and feedback. Strength testing showed tensile strength to be nearly four times as strong as the OE ball joints.
Designed to fit all 2024 and up S650 Mustang models. These ball joints come with all necessary hardware and are greaseable unlike the OE ball joint.
Note: 18" wheels are required for clearance. When using these ball joints, which relocate the outer control arm pivot point, a bump steer kit must be used due to the changes in geometry between the control arm and the tie rod ends which increases bump steer. Check out our bump steer kit here.
Product Benefits
Replaces lower lateral link ball joints
Raises front roll centre for improved handling
Reduces body roll
Reduces understeer
All necessary hardware included
Greaseable
Exceeds O.E. ball joint strength and durability
Fitment: 2024+ GT & Dark Horse Mustangs
Warranty Info
Steeda offer a limited lifetime warranty for material and manufacturing defects.
The warranty is for the original purchaser.
WHAT IS NOT COVERED
The following items are not covered under the Limited Warranty:
1. Failure or damage resulting from normal wear and tear, improper installation, repair, abuse, misuse, neglect, negligence, accidents, corrosion, or the alteration or modification of a part by the customer.
2. Failure or damage caused by work not performed by Steeda.
3. Failure or damage caused by a defective part or accessory not installed by Steeda main dealer.
4. Labour for the removal from a vehicle and reinstallation of a part or component sold “over the counter” or “over the internet.”
5. Service adjustments, such as calibration or alignments.
6. Rust or corrosion to parts caused by environmental conditions such as, but not limited to, salt or other caustic chemicals is not covered by Steeda's warranty.
7. Pitting is caused by brake dust, chemical abuse, or lack of maintenance and is not covered by Steeda's warranty.
8. Incidental or consequential damages. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
GPSR Product info
Importer: Steeda Europe (Performance Imports BV)
Contact:
Postal Address: Choorhoekseweg 8, 4424 NW, Wemeldinge, Netherlands
Email address: info@steeda.co.uk
Read more GPSR info here: Terms of service (section 21)
Choose options