Steeda Mustang Rear Sway Bar with Endlinks (2005-2014)
Looking to build the ultimate handling Mustang? Steeda's rear sway bar should be part of your handling package! Our rear sway bar is the ultimate upgrade for your 2005 and newer Mustang.
Compared to the 2011 Mustang 7/8" (22mm) sway bar our bar is 150% stiffer. For vehicles equipped with a 1" (25mm) rear bar our bar will provide an increases in stiffness of 75%.
Our rear sway bar can be used with the stock front sway bar or is a great complement to our 555-1070 adjustable front mustang sway bar for the ultimate in performance and tuneability.
- These parts are less prone to cracking/fatigue failure on the ends themselves.
- It also reduces unwanted deflection in the sway bar end. Excess deflection creates unwanted geometry changes, which physically changes your sway bar stiffness to a non-ideal rate.
- With less unwanted deflection, our bars will 'wear out' slower - any spring will eventually become softer over time as it is cycled through its life, our bars will maintain their designed rate for longer with less unwanted deflection.
Our bar rates are developed and optimized through advanced vehicle dynamic simulation and through extensive real-world testing. We engineered these bars to control the vehicles' roll stiffness properly while still allowing you to run softer springs. This optimizes your overall grip and balance of the vehicle while still allowing you to maintain exceptional ride quality.
Note: Does not fit convertible.
- Competition level proven handling performance
- Improves steering response and eliminates understeer
- 75% to 150% stiffer than stock depending on OEM bar.
Warranty Info
Steeda offer a limited lifetime warranty for material and manufacturing defects.
The warranty is for the original purchaser.
WHAT IS NOT COVERED
The following items are not covered under the Limited Warranty:
1. Failure or damage resulting from normal wear and tear, improper installation, repair, abuse, misuse, neglect, negligence, accidents, corrosion, or the alteration or modification of a part by the customer.
2. Failure or damage caused by work not performed by Steeda.
3. Failure or damage caused by a defective part or accessory not installed by Steeda main dealer.
4. Labour for the removal from a vehicle and reinstallation of a part or component sold “over the counter” or “over the internet.”
5. Service adjustments, such as calibration or alignments.
6. Rust or corrosion to parts caused by environmental conditions such as, but not limited to, salt or other caustic chemicals is not covered by Steeda's warranty.
7. Pitting is caused by brake dust, chemical abuse, or lack of maintenance and is not covered by Steeda's warranty.
8. Incidental or consequential damages. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Choose options