
When lowering your S550/S650 Mustang, the roll centre of the vehicle is also lowered. This leads to symptoms you have likely experienced: reduced steering response, increased body roll, and reduced cornering grip.
Solution: Steeda's Premium Mustang Front Control Arm, a must for all lowered 2015+ Mustangs. This arm is manufactured to OE specifications, with one major benefit: roll center correction.
By increasing the ball stud height on the lateral links, Steeda has eliminated the adverse effects of lowering your vehicle by raising the front roll center. This, in turn, helps to increase steering response, decrease body roll, and increase cornering grip, helping you turn even better lap times!
These are a must for any S550/S650 Mustang owner looking a bolt-on suspension upgrade to increase handling performance.
Use in conjunction with our 555-8133 Steeda S550 Mustang Bumpsteer Kit or 555-8179 Steeda S650 Mustang Bump Steer Kit for best results.
*Achieve -3.3 degrees of negative camber by pairing these Front Control Arms with Steeda Caster Camber Plates 555-8139 and open up your strut tower hole (Cutting Tool, 555-8920).
Steeda offer a limited lifetime warranty for material and manufacturing defects.
The warranty is for the original purchaser.
WHAT IS NOT COVERED
The following items are not covered under the Limited Warranty:
1. Failure or damage resulting from normal wear and tear, improper installation, repair, abuse, misuse, neglect, negligence, accidents, corrosion, or the alteration or modification of a part by the customer.
2. Failure or damage caused by work not performed by Steeda.
3. Failure or damage caused by a defective part or accessory not installed by Steeda main dealer.
4. Labour for the removal from a vehicle and reinstallation of a part or component sold “over the counter” or “over the internet.”
5. Service adjustments, such as calibration or alignments.
6. Rust or corrosion to parts caused by environmental conditions such as, but not limited to, salt or other caustic chemicals is not covered by Steeda's warranty.
7. Pitting is caused by brake dust, chemical abuse, or lack of maintenance and is not covered by Steeda's warranty.
8. Incidental or consequential damages. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Importer: Steeda Europe (Performance Imports BV)
Contact:
Postal Address: Choorhoekseweg 8, 4424 NW, Wemeldinge, Netherlands
Email address: info@steeda.co.uk
Read more GPSR info here: Terms of service (section 21)
Choose options
