Steeda Mustang Hardcore Rear Adjustable Ride Height System 2015-2024+
Due to the shock absorber location, coilovers on an S550/S650 can be detrimental to your chassis. For those looking for an alternative, this kit from Steeda gives the rear of your car coilover-like adjustability with reduced unsprung weight so that you can dial in your car for the track. If you drag race or road race, you can benefit from this Rear Adjustable Ride Height System.
For those that enjoy the track, whether for fun track-day action or serious Time Attack, Sprint / Auto-Cross or full on racing, this system was developed on our red HPDE car and yellow #20 racecar and will give you the ability to quickly and easily swap your rear springs. Corner balancing can also be achieved with the simple adjustability that the ride height system offers. This allows you to maximize performance at the track and improve lap times. Lighter than traditional springs, you are also able to reduce unsprung weight.
In drag racing applications, the ability to change springs quickly will be beneficial, but the biggest advantage lies in the ability to increase tire clearance. If you are a weekend racer, this kit lets you adjust your ride height with a 1/2" drive ratchet, achieve the clearance you need for your drag pack, and then return your ride height for your street setup after the track.
Built to handle the track. Engineered and manufactured in the USA from premium materials that will withstand stresses at the track. You can be confident that this kit will be ready to perform.
Product Benefits:
- Reduced unsprung weight, 16% less weight than factory rear springs
- 28% less weight than our Steeda Rear Drag Springs
- 48% less weight than our Steeda Rear Dual Rate Springs
- Manufactured from billet 1018 steel
- Billet hardcoat anodized 6061 aluminium
- Includes all hardware
- Swap springs without need for realignment
- Fits readily available 6" long, 2.5" diameter coilover springs so you have access to many spring rates
- Quickly and easily adjust ride height
- Up to 2.5" of adjustment
- Ability to corner balance
- No permanent modification
- Compatible with MagneRide, will not affect electronic suspension
- Easier adjustment than other kits on the market
Fitment:
S550 Mustang: 2015-2023 - All
S650 Mustang: 2024+ - All
INSTALL GUIDE - CLICK HERE
SPECIAL ORDER PART
Warranty Info
Steeda offer a limited lifetime warranty for material and manufacturing defects.
The warranty is for the original purchaser.
WHAT IS NOT COVERED
The following items are not covered under the Limited Warranty:
1. Failure or damage resulting from normal wear and tear, improper installation, repair, abuse, misuse, neglect, negligence, accidents, corrosion, or the alteration or modification of a part by the customer.
2. Failure or damage caused by work not performed by Steeda.
3. Failure or damage caused by a defective part or accessory not installed by Steeda main dealer.
4. Labour for the removal from a vehicle and reinstallation of a part or component sold “over the counter” or “over the internet.”
5. Service adjustments, such as calibration or alignments.
6. Rust or corrosion to parts caused by environmental conditions such as, but not limited to, salt or other caustic chemicals is not covered by Steeda's warranty.
7. Pitting is caused by brake dust, chemical abuse, or lack of maintenance and is not covered by Steeda's warranty.
8. Incidental or consequential damages. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Choose options