Steeda Focus ST Cold Air Intake

Take the intake system of your MK3 Ford Focus ST to the next level with our in house designed, tested, and manufactured Steeda Cold Air System.

This cold air system does not require any ECM tuning making it an easy direct bolt on. With peak to peak gains of 10 horsepower at the wheels, and max gains of up to 16 horsepower, these are performance gains you will definitely feel.

Our system incorporates a roto-moulded thermoplastic airbox, a precision-moulded thermoplastic velocity stack, a high-flow serviceable air filter, and a silicone intake tube.

Our system was designed to utilize the cold air feed coming from the grille, while the airbox seals directly to the hood liner to ensure a cool, dense air charge to the engine.

Can be further enhanced with an SCT tuning device & Steeda custom calibration for even higher gains. AVAILABLE NOW.

You can also add our Steeda upgraded Turbo Inlet Tube for a full intake package.

Product Benefits

• Utilizes the factory cold air feed duct from the grille
• Billet aluminium velocity stack
• Does not require any engine tuning
• Greatly increased intake resonance
• Looks great under bonnet
• Improves resistance to heat soak
• BOLT ON POWER WITHOUT TUNE
  

Nice install vid from our friends over at CJ

STEEDA INSTALL TIP! : The kit is designed to seal to the bonnet top for an effective heat seal. If you keep your OEM bonnet stay and don't fit gas struts, you may need to cut some small notches in the rubber seal to allow the bonnet stay to sit nicely...

Part: 555-3169

Fitment: 2013+ Ford Focus ST mk3

Steeda offer a limited lifetime warranty for material and manufacturing defects.

The warranty is for the original purchaser.

WHAT IS NOT COVERED
The following items are not covered under the Limited Warranty:

1. Failure or damage resulting from normal wear and tear, improper installation, repair, abuse, misuse, neglect, negligence, accidents, corrosion, or the alteration or modification of a part by the customer.
2. Failure or damage caused by work not performed by Steeda.
3. Failure or damage caused by a defective part or accessory not installed by Steeda main dealer.
4. Labour for the removal from a vehicle and reinstallation of a part or component sold “over the counter” or “over the internet.”
5. Service adjustments, such as calibration or alignments.
6. Rust or corrosion to parts caused by environmental conditions such as, but not limited to, salt or other caustic chemicals is not covered by Steeda's warranty.
7. Pitting is caused by brake dust, chemical abuse, or lack of maintenance and is not covered by Steeda's warranty.
8. Incidental or consequential damages. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.

FULL TERMS AND CONDITIONS HERE

Importer: Steeda Europe (Performance Imports BV)

Contact:
Postal Address: Choorhoekseweg 8, 4424 NW, Wemeldinge, Netherlands
Email address: info@steeda.co.uk

Read more GPSR info here: Terms of service  (section 21)