Steeda Focus Performance Springs
Steeda Focus Lowering Springs for the 2012-2013 Focus are CNC wound in the United States with high tensile strength chrome-silicon spring wire. They are then heat treated, shot peened, re-heat treated, and finally powder-coated to ensure no spring sag during over the course of their service life, while also providing excellent corrosion resistance.
Put real handling into your Focus with Steeda Focus Lowering Springs for 2012-2013 Focus. These precision-engineered springs lower the Focus 1" in the front and. 0.8" in the rear to lower the center of gravity, and improve overall vehicle appearance. Greatly improves the feel of the uninspiring factory suspension spring rates by improving traction , reducing built in understeer, and improving cornering ability.
One of the important aspects of Steeda Focus Lowering Springs for 2012-2013 Focus is the front to rear balance. Like most front wheel drive cars the Focus is prone to severe understeer when pushed to the limit. Steeda springs increase the rear spring rate proportionally more than they increase the front spring rate. This reduces the understeer considerably, while still being conservative enough to produce mild understeer at the limit so that the car is easy to drive.
Product Features- Reduced body roll
- Less nose dive
- Increase traction
- Reduce understeer considerably
- Overall improved handling
- Comes with a LIFETIME warranty
US Customer Reviews
"I installed the Steeda Springs on my car about two weeks ago and all I have to say is this is the way the car should have come from the factory. The car has loosed the rear end rake from the factory springs and over all is about an inch lower. Also with the Steeda rear sway thats on my car there is basically no understeer to be found where ever you point the car it goes. If you are going to lower the car do it once, get these springs!"
Warranty Info
Steeda offer a limited lifetime warranty for material and manufacturing defects.
The warranty is for the original purchaser.
WHAT IS NOT COVERED
The following items are not covered under the Limited Warranty:
1. Failure or damage resulting from normal wear and tear, improper installation, repair, abuse, misuse, neglect, negligence, accidents, corrosion, or the alteration or modification of a part by the customer.
2. Failure or damage caused by work not performed by Steeda.
3. Failure or damage caused by a defective part or accessory not installed by Steeda main dealer.
4. Labour for the removal from a vehicle and reinstallation of a part or component sold “over the counter” or “over the internet.”
5. Service adjustments, such as calibration or alignments.
6. Rust or corrosion to parts caused by environmental conditions such as, but not limited to, salt or other caustic chemicals is not covered by Steeda's warranty.
7. Pitting is caused by brake dust, chemical abuse, or lack of maintenance and is not covered by Steeda's warranty.
8. Incidental or consequential damages. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Choose options