Steeda Explorer Rear Differential / Pinion Heavy Duty Bushing Kit (2020-2024)

Steeda’s new ‘20+ Explorer Diff/Pinion Bushings are the perfect complement for our industry leading Explorer Diff brace. Made with high quality, domestically poured urethane, billet aluminium sleeves and steel washer made in house. These add strength and durability to your factory rear bushings until full replacements are available. We tested multiple durometers before we found one that was the perfect balance between performance and street. These bushings add zero NVH while also being 45% stiffer than the factory bushings. Simple, reversable install means no permanent modifications!

Eliminate subframe movement. After upgrading the Explorer with the rear differential brace, took another look to see what else we could improve. We found that there was still movement in the front of the subframe. These bushings control that movement for better launches and acceleration.

By installing these bushings and getting rid of subframe movement, you give your Explorer a more connected and "direct" feel. This leads to a more exciting experience when you drive!

You can expect high-quality construction and great fitment from this kit. The urethane bushings are domestically sourced and the bushing sleeves and washers are made in-house at Steeda.

Features & Benefits:

• Simple installation
• No increase in NVH
• 100% made in the USA
• 45% stiffer than factory
• Increased traction
• Reversible, no permanent modifications
• Decreased wheel hop
• Less pinion angle change when launching
• Extends rear diff bushing life
• Works perfectly with the Steeda Diff Brace
• Bulletproof your rear-end
• Designed for mild to heavily modified Explorers

STEEDA TIP: Only install this mod after installing the Steeda rear diff brace, as it will have minimum benefit with the stock rear diff setup.

INSTALL GUIDE

Steeda offer a limited lifetime (minimum 2 years) warranty for material and manufacturing defects.

The warranty is for the original purchaser only and is non-transferable.

WHAT IS NOT COVERED
The following items are not covered under the Limited Warranty:

1. Failure or damage resulting from normal wear and tear, improper installation, repair, abuse, misuse, neglect, negligence, accidents, corrosion, or the alteration or modification of a part by the customer.
2. Failure or damage caused by work not performed by Steeda.
3. Failure or damage caused by a defective part or accessory not installed by Steeda main dealer.
4. Labour for the removal from a vehicle and reinstallation of a part or component sold “over the counter” or “over the internet.”
5. Service adjustments, such as calibration or alignments.
6. Rust or corrosion to parts caused by environmental conditions such as, but not limited to, salt or other caustic chemicals is not covered by Steeda's warranty.
7. Pitting is caused by brake dust, chemical abuse, or lack of maintenance and is not covered by Steeda's warranty.
8. Incidental or consequential damages. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.

FULL TERMS AND CONDITIONS HERE

Importer: Steeda Europe (Performance Imports BV)

Contact:
Postal Address: Choorhoekseweg 8, 4424 NW, Wemeldinge, Netherlands
Email address: info@steeda.co.uk

Read more GPSR info here: Terms of service  (section 21)