Steeda Bronco Clutch Spring Kit (2021-2023)
Steeda's Bronco Clutch Spring Kit is designed to give your Bronco a better feel and help you have a more enjoyable and exciting driving experience. This easy-to-install and instantly noticeable upgrade is a perfect start to modifying your off-roader. Thousands of Mustang and Focus customers have felt and loved the difference, so join the Steeda clutch spring club!
Your new Bronco comes with a high-rate clutch assist spring installed from the factory. This high-rate spring is what causes such a vague and disconnected clutch pedal feel. The clutch pedal travels in a circular arc, with the spring assist in the middle of that clutch pedal travel. The middle of that motion initially compresses the spring and allows it to extend after the first 30 degrees of travel. The combination of a high-rate assist spring and the motion of the pedal during engagement causes a non-linear and sometimes confusing pedal feel. Having a non-linear pedal feel makes it hard to modulate the clutch on your Bronco.
Our Steeda Bronco Clutch Assist Spring completely replaces the factory assist spring. Our engineers have dialed it into just the right amount of spring rate, about 40% less than the factory, to get you the perfect clutch pedal feel. This assist spring is manufactured from piano wire that naturally has high tensile strength and high elastic qualities. Our piano wire spring ensures a consistent spring rate and minimal sag even after repeated use. With the addition of our clutch assist spring, you will notice a much more linear feeling clutch - the reason is that we take out much of the influence involved in your clutch pedal motion caused by the assist spring, allowing you to feel exactly what is happening with your clutch engagement.
Product Benefits:
Stiffer pedal feel
40% less spring assist than the factory
Consistent spring rate
Replaces factory spring
More exciting driving feel
STEEDA TIP: Note all EU Broncos are autos so you wont need this unless you have imported a US Manual car...
Warranty Info
Steeda offer a limited lifetime warranty for material and manufacturing defects.
The warranty is for the original purchaser.
WHAT IS NOT COVERED
The following items are not covered under the Limited Warranty:
1. Failure or damage resulting from normal wear and tear, improper installation, repair, abuse, misuse, neglect, negligence, accidents, corrosion, or the alteration or modification of a part by the customer.
2. Failure or damage caused by work not performed by Steeda.
3. Failure or damage caused by a defective part or accessory not installed by Steeda main dealer.
4. Labour for the removal from a vehicle and reinstallation of a part or component sold “over the counter” or “over the internet.”
5. Service adjustments, such as calibration or alignments.
6. Rust or corrosion to parts caused by environmental conditions such as, but not limited to, salt or other caustic chemicals is not covered by Steeda's warranty.
7. Pitting is caused by brake dust, chemical abuse, or lack of maintenance and is not covered by Steeda's warranty.
8. Incidental or consequential damages. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Choose options