Girodisc Front & Rear 2pc Floating Discs for GT350 Mustang

These lightweight 2 piece rotors for the S550 Mustang GT350 improve your on track performance by lowering weight, improving cooling and looking great. OK the third one might not be an actual real improvement, but we're sure that morale has an effect on track too! 

The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. 

The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminium. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilises 72 internal curved vanes, developed in racing to act as a centrifugal pump to force cooling air through the disc.

The rotor and hat have a floating mount system, which utilises 8 or 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by grade 12 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self centre between the pads.

Once the Girodisc system is in place, simply replace the cast iron rotor when needed.

Priced per pair. All kits are built to order and are not held in stock.

Choose front rear or both from drop down...

Steeda offer a limited lifetime warranty for material and manufacturing defects.

The warranty is for the original purchaser.

WHAT IS NOT COVERED
The following items are not covered under the Limited Warranty:

1. Failure or damage resulting from normal wear and tear, improper installation, repair, abuse, misuse, neglect, negligence, accidents, corrosion, or the alteration or modification of a part by the customer.
2. Failure or damage caused by work not performed by Steeda.
3. Failure or damage caused by a defective part or accessory not installed by Steeda main dealer.
4. Labour for the removal from a vehicle and reinstallation of a part or component sold “over the counter” or “over the internet.”
5. Service adjustments, such as calibration or alignments.
6. Rust or corrosion to parts caused by environmental conditions such as, but not limited to, salt or other caustic chemicals is not covered by Steeda's warranty.
7. Pitting is caused by brake dust, chemical abuse, or lack of maintenance and is not covered by Steeda's warranty.
8. Incidental or consequential damages. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.

FULL TERMS AND CONDITIONS HERE

Importer: Steeda Europe (Performance Imports BV)

Contact:
Postal Address: Choorhoekseweg 8, 4424 NW, Wemeldinge, Netherlands
Email address: info@steeda.co.uk

Read more GPSR info here: Terms of service  (section 21)