Ford Performance GEN 3 5.0L Coyote 460HP Mustang V8 Crate Engine
The Ford Performance all-aluminium 2018-2022 5.0L Coyote crate engine is a modern 5.0L 32-valve DOHC V-8 that uses advanced features like Direct and Port Fuel Injection, Twin Independent Variable Camshaft Timing (Ti-VCT), high-flow cylinder heads, and heightened compression ratio to deliver 460 horsepower @ 7,000 rpm and 420 ft.-lb.+ of torque @ 4,600 rpm (with premium fuel). The lightweight plasma transferred wire arc spray aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, optimized oil drainback and windage control to improve high-rpm performance.
Features:
- 460 Horsepower @ 7,000 rpm
- 420 ft.-lb.+ of Torque @ 4,600 rpm
- 12.0:1 Compression ratio
- Hypereutectic aluminum pistons
- Sintered steel connecting rods as used on BOSS302 Mustang
- Forged steel crankshaft
- Aluminum block which features plasma transferred wire arc spray weld liner coating
- Longer, 12 mm head bolts for higher clamp load
- 10 qt capacity oil pan
- Tuned composite intake manifold provides efficient air delivery and weight savings
- 80 mm single bore "drive by wire", electronic throttle body with variable runner control
- High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing
- Includes engine harness and dual mass flywheel, for engine equipped with automatic flex plate, see M-6007-M50CAUTO
- Engine mount bosses and bell housing mount pattern common to 4.6L modular engines
- Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY
5.0L Coyote air conditioning kit available, see M-8600-M50AC
5.0L Mustang motor mount kit available, see M-6038-M50
5.0L Mustang engine cover kit available, see M-9680-M50B
Photo and specs may vary
Engine weight: 445 lbs.
NOTE:
Vehicle harness and PCM NOT included
Use Ford Performance M-6017-M50B Control Pack which includes wiring, PCM and installation kit, designed for project car installation
Does not include alternator, for alternator kit see M-8600-M50BALT or M-8600-M50ALTA
TECHNICAL INFO SHEET - CLICK HERE
Part: M-6007-M50C
Fitment: Mustang GT 2018-2022 or anything you can fit it to!
These crate engines are SPECIAL ORDERS - Please Contact us for final pricing & delivery ETA etc as both will change all the time dependant on Ford's current status and pricing.
NOTE: Ships on a pallet & is very heavy!! (over 250kgs packaged)
Warranty Info
Steeda offer a limited lifetime warranty for material and manufacturing defects.
The warranty is for the original purchaser.
WHAT IS NOT COVERED
The following items are not covered under the Limited Warranty:
1. Failure or damage resulting from normal wear and tear, improper installation, repair, abuse, misuse, neglect, negligence, accidents, corrosion, or the alteration or modification of a part by the customer.
2. Failure or damage caused by work not performed by Steeda.
3. Failure or damage caused by a defective part or accessory not installed by Steeda main dealer.
4. Labour for the removal from a vehicle and reinstallation of a part or component sold “over the counter” or “over the internet.”
5. Service adjustments, such as calibration or alignments.
6. Rust or corrosion to parts caused by environmental conditions such as, but not limited to, salt or other caustic chemicals is not covered by Steeda's warranty.
7. Pitting is caused by brake dust, chemical abuse, or lack of maintenance and is not covered by Steeda's warranty.
8. Incidental or consequential damages. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Choose options