Diode Dynamics S550 Mustang Interior LED Conversion Kit

This great little LED kit for the interior of your S550 Mustang from Diode Dynamics

Kits are available for 2015 - 2017 models and 2018+ models. Please select the relevant kit for your vehicle.

Available in a choice of colours
For 2015 - 2017 it is available in Cool White, Red and Blue
For 2018+ it is available in Green, Cool White, Red

The kits we offer are all STG2 with the exception of the 2018+ Green kit which is STG1.STG2 = 440 lumens, STG1 = 300 lumens

The pre facelift 2015 - 2017 kit includes:
2-194 HP5 Map Light LED Bulbs
1-194 HP5 Trunk Light LED Bulb (Not included in 2018+ kits)
1-194 HP5 Glove Light LED Bulb
4-74 SMD1 Vanity Light LED Bulbs

The Facelift 2018+ kits do not include a Trunk light.

Diode Dynamics LED Conversion Kits include all of the LED bulbs you need to replace the incandescent bulbs in your vehicle. It has been tested in your specific vehicle, for perfect fitment, and no guesswork! No modification is required for installation, you simply replace the bulbs!

BRIGHTNESS

This LED package will provide a substantial improvement in brightness compared to stock. The factory bulbs are 35 lumens each, while the replacement Cool White Stage 1 HP3 Bulbs are 55 lumens and the Cool White Stage 2 HP5 Bulbs are 92 lumens each.

Lumens: BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.

QUALITY

LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means only brand-name suppliers such as Epistar, Cree, Osram, and Samsung.

While Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty.

Part Numbers:
DD0222 - 2015-2017 Blue Stage 2
DD0224 - 2015-2017 Red Stage 2
DD0226 - 2015-2017 Cool White Stage 2
DD0358 - 2018+ Red Stage 2
DD0360 - 2018+ Cool White Stage 2