It is finally time to get the power to the wheels with the cp-e Ford Fiesta ST Driver Side Motor mount (DSMM)!
cp-e is proud to release the Fiesta ST Driver Side Engine Mount. Our Ford Fiesta ST DSMM has been a long time in the making. We are confident that these will be the last side mounts you will ever need.
This product is the perfect compliment to our Passenger Side Mount.
While a rear motor mount is must for your Fiesta ST the side mounts are more for the hard core driver who wants maximum traction on track days etc
If you are building a track car then these are an essential addition. Too many people constantly try and increase power without worrying about increasing traction to put it down.
Ford Fiesta ST DSMM Passenger Side Mount Features
(*) by which we mean more comfort than the firmer durometer mount! So good for a "street and track" car, whereas an all out track focus build should go firmer....
NOTE: PASSENGER SIDE refers to LHD cars. Its DRIVER side on RHD!
The side engine mount brackets are made from 1/4" mild steel that is laser cut for precise fitment. The bushing housing is CNC machined from a solid block of aluminium. And like our rear motor mounts these bushings are made from rubber instead of urethane.
You have the power to choose your own durometer! We let you decide what degree of comfort vs stiffness you want to run. The 55A durometer is for the driver that is looking to get the power down to the ground without sacrificing too much comfort. The 70A durometer is more for those that drive their cars hard. No matter which durometer you chose the engine will have noticeably less movement from stock.
Say goodbye to wheel hop and torque steer when you combine this with our already popular rear motor mount.
2 Durometers Available
In order to create a mount that works for all customers, we're offering the side mount in 2 durometers. 55A will give you very little noticeable increase in vibrations while providing a large decrease in wheel hop and engine movement.
If stopping engine movement even with added vibrations over the 55A is the goal, the 70A durometer eliminates wheel hop even further. Both choices reduce wheelspin and provide a daily drivable ride.
Black Anodized Finish
To prevent corrosion and maintain an all over finish for the life of the product, we've anodized the Fiesta ST Driver Side Mount in a satin black.
This finish on the Fiesta ST Driver (LHD cars) Side Mount not only looks great, but it will protect the mount for years to come.
Steeda offer a limited lifetime warranty for material and manufacturing defects.
The warranty is for the original purchaser.
WHAT IS NOT COVERED
The following items are not covered under the Limited Warranty:
1. Failure or damage resulting from normal wear and tear, improper installation, repair, abuse, misuse, neglect, negligence, accidents, corrosion, or the alteration or modification of a part by the customer.
2. Failure or damage caused by work not performed by Steeda.
3. Failure or damage caused by a defective part or accessory not installed by Steeda main dealer.
4. Labour for the removal from a vehicle and reinstallation of a part or component sold “over the counter” or “over the internet.”
5. Service adjustments, such as calibration or alignments.
6. Rust or corrosion to parts caused by environmental conditions such as, but not limited to, salt or other caustic chemicals is not covered by Steeda's warranty.
7. Pitting is caused by brake dust, chemical abuse, or lack of maintenance and is not covered by Steeda's warranty.
8. Incidental or consequential damages. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Choose options