SteedaUK

Girodisc 2 Piece Floating Brake Disc for Ford Focus RS mk3 - Front and Rear

€999,17 exc TAX

Looking for some serious weight saving, style and performance for your Focus RS? Then look no further than the Girodisc 2 piece brake discs both front and rear.... Choose Front or Rear from the drop down (or add both if required!) Rotational weight savings are a key way to gain performance and stopping power!

As a guide, EU delivery cost varies on service requested and weight / dimensions. Final rate depends on which EU Zone you are in for DPD services. Below are some guide examples. 

Some countries may be serviced with other providers if required.

FREE SHIPPING is available on orders over a certain amount (country dependant). Some product do not qualify for the free shipping offers due to the weight / size of the item. 

We aim to ship same day if ordered before midday.

1. Standard EU Shipping: DPD Courier with tracking - 2-3 days (for main EU countries)

DPD Zone 1: €14.99 + vat 0-5KG      - €19.99 5-30 KG

2. Small Items (via Royal Mail) -from 2 days - 2 weeks depending on location.

Covers all European countries:  €14.99 + vat 0-2KG:

You will receive a shipping notification with tracking details once order is processed.

NOTE  We can ship worldwide. Please contact us if assistance required as a custom shipping solution may be required.

We reserve the right to change charges and services as required.

Looking for some serious weight saving, style and performance for your Focus RS? Then look no further than the Girodisc 2 piece brake discs both front and rear....

Choose Front or Rear from the drop down (or add both if required!)

The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.

The Girodisc front rotors are approx 18.0lbs (8.16 Kg) vs. 23.1lbs (10.4 Kg)  for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. Equivalent proportional saving on the rear (smaller) discs...

The central hat section of the Girodisc rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes 48 curved directional vanes, developed in racing to act as a centrifugal pump to force cooling air through the disc.

The rotor and hat have a floating mount system, which utilizes 8 or 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by grade 12 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.

Once the Girodisc system is in place, simply replace the cast iron rotor when needed.

Sold/priced per pair.

Part:

A1-169 - Front Discs
A2-169 - Rear Discs

 

Recently viewed